Two-Component Waterproofing Membrane - به ملات – تامین کننده بهترین ملات خشک کشور

Applications:

• Waterproofing and protecting concrete surfaces against water penetration

• Waterproofing for swimming pools, roofs, canals, bathrooms, etc.

• Suitable for moisture-exposed surfaces such as terraces, basement walls, retaining walls, and damp ground-contact areas

Technical Specifications:

• This type of waterproofing typically consists of two components: a powder part and a liquid part, which are mixed in a specific ratio.

• High mechanical strength with excellent adhesion to concrete surfaces

• Flexible and resistant to both positive and negative water pressure

• Initial drying time: a few hours

• Final curing time: 7 days

• Color: Available in grey, dark grey, white, and water-absorbent finishes

Instructions for Use:

Surface Preparation:

• Ensure that the concrete surface is completely dry and free from contaminants.

• Mix the two components according to the specified ratio before application.

Application:

• Apply the mixture evenly over the concrete surface using a roller, brush, or similar tools such as a trowel or spray gun.

• Ensure that all cracks and joints are completely covered.

Consumption Rate:

• For low-pressure damp environments: approximately 1.5–2 kg per square meter

• For high-pressure positive or negative environments: up to 4 kg per square meter depending on static pressure (typically 5 to 10 meters depth)

Warnings – Do Not Use In:

• Avoid contact with skin and eyes; always wear gloves and a mask during application.

• Ensure adequate ventilation during use and avoid inhalation of vapors.