Cementitious Cosmetic Putty - به ملات – تامین کننده بهترین ملات خشک کشور

Applications:

• Suitable for use on concrete, brick, gypsum, and cement walls

• Applicable in construction, industrial, and infrastructure projects

Technical Specifications:

• Color: Grey and White

• Compressive strength: Minimum 40 MPa

• Tensile strength: Minimum 7 MPa

• Pot life: Approximately 40 minutes at 20°C

• Initial drying time: Around 24 hours

• Final curing time: Around 7 days

• Surface corrections must be made within the working time

Instructions for Use:

Surface Preparation:

• The substrate must be clean and free from dust, oil, and other contaminants

• If needed, lightly moisten the surface before application

Mixing:

• Mix the specified amount of dry mortar with clean water at approximately 25% by weight

• Use a suitable mixer to obtain a uniform consistency

• Let the mixture sit for 5 minutes, then remix briefly to achieve a workable paste

Application:

• Apply the prepared mixture using a putty knife or trowel over cracks and joints

• Ensure all gaps and voids are completely filled with no air pockets remaining

• Level the surface and clean carefully after application

Maximum Working Time:

The maximum usable time of the prepared mortar is about 40 minutes at 20°C
(Note: This time may vary depending on temperature and ambient conditions)

Consumption:

Depending on the width and depth of the cracks or joints, the typical consumption is between 1.5 to 3.5 kg per meter of joint

Warnings – Do Not Use In:

• Temperatures below 5°C

• High-humidity environments or under rain exposure

• Oily or contaminated surfaces

• Avoid contact with skin and eyes

• Store in a dry, covered place and do not add unauthorized additives unless specified by the manufacturer